Abc Inventory Software Keygen

7.1 Overview of Installing Management Agents Using Add Host Targets Wizard or EM CLI Oracle Management Agent (Management Agent) is one of the core components of Enterprise Manager Cloud Control that enables you to convert an unmanaged host to a managed host in the Enterprise Manager system. The Management Agent works in conjunction with the plug-ins to monitor the targets running on that managed host. Therefore, at any point in time, if you want to monitor a target running on a host, ensure that you first convert that unmanaged host to a managed host by installing a Management Agent, and then manually discover the targets running on it to start monitoring them. To install a Management Agent, use the Add Host Targets Wizard that is accessible from within the Enterprise Manager Cloud Control console, or use EM CLI.

Oracle recommends that you use this wizard, or EM CLI, for the mass-deployment of Management Agents. Describes a method to access the Add Host Targets Wizard.

Figure 7-1 Add Host Targets Wizard The Add Host Targets Wizard is an application that offers GUI-rich, interactive screens. To access it, do one of the following: • From the Setup menu, select Add Target, then select Add Targets Manually.

On the Add Targets Manually page, select Add Host Targets and click Add Host. • From the Setup menu, select Add Target, then select Auto Discovery Results.

Download the ABC Inventory Software Package in the button above. After downloading unzip the file and read the instruction inside along with the keygen. Install the ABC Inventory Software 1.5 keygen. After installing the ABC Inventory Software 1.5 keygen, get the activation code and use it. Victoria, la serie tv su Canale 5: anticipazioni della prima puntataVictoria: le anticipazioni della prima puntata.

On the Auto Discovery Results page, under the Servers, Storage and Network tab, select a host that you want to monitor from the displayed list, then click Promote. The wizard enables you to do the following on multiple hosts across platforms with options to run preinstall and postinstall scripts: • Deploy a fresh Management Agent • Clone an existing well-tested and patched Management Agent • Install a Management Agent (called Shared Agent) using an existing, centrally shared Management Agent (called Master Agent). Note: This chapter only describes how you can deploy a fresh Management Agent using the Add Host Targets Wizard. For information on cloning an existing instance and deploying a Management Agent using a shared instance, refer to To monitor a target, you need to add the target to Enterprise Manager Cloud Control either using the Auto Discovery Results page, the Add Targets Manually page, or the discovery wizards offered for the targets you want to monitor.

For information about discovering targets in Enterprise Manager Cloud Control, refer to the chapter on adding targets in the. When you install a standalone Management Agent on a host, you will see the following default contents in the agent base directory: _____core _____12.1.0.5.0 _____plugins _____agent_inst _____sbin _____plugins.txt _____plugins.txt.status _____agentimage.properties. 7.2 Before You Begin Installing Management Agents Using Add Host Targets Wizard or EM CLI Before you begin installing a Management Agent using the Add Host Targets Wizard, or EM CLI, keep these points in mind: • The Add Host Targets Wizard and EM CLI convert an unmanaged host to a managed host in the Enterprise Manager system by installing a 12.1.0.5.0 Management Agent. • Oracle recommends you to use the Add Host Targets Wizard or EM CLI to mass-deploy Management Agents in your environment. • To install a Management Agent on a host, you must download and apply the required version of the Management Agent software for the host platform, using Self Update. Only the Management Agent software for the OMS host platform is downloaded and applied by default. To access Self Update, from the Setup menu, select Extensibility, then select Self Update.

For information on how to download and apply the Management Agent software for a platform, see. • Oracle Management Agent 12 c communicates only with Oracle Management Service 12 c and not with any earlier release of Enterprise Manager. When you use the Add Host Targets Wizard of a 12.1. Crack Para Autocad 2000i Tutorials. 0.5.0 OMS, or EM CLI, you can install only the latest Management Agent version on a platform, for which the Management Agent software is downloaded and applied.

For example, if the 12.1.0.5.0 Management Agent software for a particular platform is downloaded and applied, you can install only a 12.1.0.5.0 Management Agent on that platform, and not a 12.1.0.4.0 or a 12.1.0.3.0 Management Agent. For information about the compatibility between 12 c releases of Management Agents and the OMS, see. • If you have multiple hosts, sharing a common mounted drive, then install the Management Agents in two different phases: • In the Add Host Targets Wizard, select the deployment type Fresh Agent Install, and install a Management Agent on the host where the drive is shared. Alternatively, you can select the deployment type Clone Existing Agent, and clone the Management Agent to the host where the drive is shared. For more information, refer to the chapter on cloning a Management Agent in the. • In the Add Host Targets Wizard, select the deployment type Add Host to Shared Agent, and install a Management Agent on all other hosts that access the shared, mounted drive. (Here, you will select the Management Agent you installed in the previous step as the master agent or shared agent.) For more information, refer to the chapter on installing a Shared Agent in the.

• If you have an Oracle RAC Cluster with multiple nodes, then you must install a Management Agent on each of the nodes separately. In other words, in the Add Host Targets Wizard, you must add each node explicitly as a destination host. • In Enterprise Manager Cloud Control 12 c Release 5 (12.1.0.5.0), you can save the Management Agent one-off patches that you want to apply on a particular version of the Management Agent software, such that these patches are automatically applied on the software whenever a new Management Agent of the same version is deployed, or an old Management Agent is upgraded to that version. For information on how to do this, see Also, you can apply one-off patches on a plug-in and create a custom patched plug-in, such that this custom patched plug-in is deployed on all the new Management Agents that you deploy, and all the old Management Agents that you upgrade. For information on how to do this, see • The Add Host Targets Wizard supports the permissive and enforcing options for Security-Enhanced Linux (SELinux). • The Add Host Targets Wizard uses SSH to establish connectivity between Oracle Management Service (OMS) and the remote hosts where you want to install the Management Agents. • Only SSH1 (SSH version 1) and SSH2 (SSH version 2) protocols offered by OpenSSH are supported for deploying a Management Agent.

• The Add Host Targets Wizard supports Named Credentials that enable you to use a set of credentials registered with a particular name specifically for this operation, by your administrator. This ensures an additional layer of security for your passwords because as an operator, you can only select the named credential, which is saved and stored by an administrator, and not know the actual user name and password associated with it. In case the named credential you select does not have the privileges to perform the installation, then you can set the named credential to run as another user (locked user account).

In this case, the wizard logs in to the hosts using the named credential you select, but performs the installation using the locked user account you set. For example, you can create a named credential titled User_A (the user account that has remote login access), and set it to run as User_X (the Management Agent install user account for which no direct login is set) that has the required privileges.

In this case, the wizard logs in to the hosts as User_A, but installs as User_X, using the privilege delegation setting (sudo or PowerBroker) specified in the named credential. The sudo, pbrun, sesu, and su privilege delegation tools are supported in Cloud Control.

• Named credentials support SSH public key authentication and password-based authentication. So you can use an existing SSH public key authentication without exposing your passwords.

To set up SSH public key authentication for a named credential, follow these steps. Note: • If you have already set up SSH public key authentication for a named credential and the SSH keys are already created, then upload the SSH keys to Enterprise Manager, as mentioned in Step (4) of the following procedure. • Enterprise Manager Cloud Control does not support the format of the SSH key that is generated using the Tectia SSH client. However, if you are generating the SSH key using the Tectia SSH client, then as a prerequisite, convert the format of that key to OpenSSH format. To do so, run the following command. Ssh-keygen --import-private-key --key-format openssh2 After converting the format, use the content of the output_filename and upload it as a private key while registering it as a Named Credential in Enterprise Manager.

Figure 7-2 Uploading SSH Keys to Enterprise Manager If you have already set up SSH public key authentication for a named credential, you can use the named credential while installing Management Agents using the Add Host Targets Wizard. • You can mass deploy Management Agents on a number of hosts in a rolling manner, using the Add Host Targets Wizard or EM CLI. In this method, the deployment proceeds continuously from one deployment phase to another, after ignoring the failed hosts in each deployment phase. The deployment process does not stop when a host fails a deployment phase. To deploy Management Agents in a rolling manner, ensure that you set the oracle.sysman.prov.agentpush.continueIgnoringFailedHost property to true in the $/sysman/prov/agentpush/agentpush.properties file, then use the Add Host Targets Wizard, or EM CLI to deploy the Management Agents. • By default, the Add Host Targets Wizard configures only the following types of plug-ins: • All discovery plug-ins that were configured with the OMS from where the Management Agent software is being deployed. • Oracle Home discovery plug-in • Oracle Home monitoring plug-in • You must have read privileges on the Oracle WebLogic Server's alert log directories for the Support Workbench (Incident) metrics to work properly.

You must also ensure that the Management Agent that is monitoring this Oracle WebLogic Server target is running on the same host as the Oracle WebLogic Server. • If you have a common mount point in your organization, then ensure that it is generic and ensure that you install the Management Agent in this generic mount point. This guideline helps when you upgrade your Management Agents to higher releases in the future within the same mount point, and not acquire new mount points each time. For example, have a mount point such as /oracle/product/agent and install the Management Agent in there so that it appears as /oracle/product/agent/agent12c.Do not install the Management Agent directly in the mount point because it breaks the upgrade path and causes problems with cleanup operations. • Upgrading a lower release of Solaris by applying a kernel patch or a patch bundle is not equivalent to installing the actual Solaris 5.10 Update 9 image.

Oracle Management Agent 12c Release 5 (12.1.0.5) was built, tested, and certified on a minimum update version of Solaris 5.10 Update 9, so Oracle recommends that you install Oracle Management Agent only on Solaris 5.10 Update 9, and not on any release that was upgraded using patches. Table 7-1 Prerequisites for Installing Oracle Management Agent Requirement Description Hardware Requirements Ensure that you meet the hard disk space and physical memory requirements as described in.

Software Requirements (For Microsoft Windows) Ensure that you have installed Cygwin 1.7 on the destination host as described in. Note: While running cygwin.bat in Microsoft Windows Server 2008 and Microsoft Windows Vista, ensure that you invoke it in administrator mode. To do this, right-click the cygwin.bat file and select Run as administrator. If you do not want to install Cygwin to deploy Management Agents on Microsoft Windows hosts using the Add Host Targets Wizard or EM CLI, you can choose to deploy Management Agents on these hosts using the PsExec process utility.

For information on how to deploy Management Agents on Microsoft Windows hosts using PsExec, see. Operating System Requirements Ensure that you install the Management Agent only on certified operating systems as mentioned in the Enterprise Manager certification matrix available on My Oracle Support. To access the Enterprise Manager certification matrix, follow the steps outlined in. For information about platforms receiving future support, refer to My Oracle Support note 793512.1. Note: If you use Oracle Solaris 10, then ensure that you have update 9 or higher installed. To verify whether it is installed, run the following command: cat /etc/release You should see the output similar to the following. Here, s10s_u6 indicates that update 6, which is not a supported update level for installation, is installed.

Solaris 10 10/08 s10s_u6wos_07b SPARC File System Requirements Ensure that the file system mounted on the destination host does not permit buffered writes. File Descriptor Requirements • Ensure that the maximum user process limit is set to 13312 or greater.

To verify the current value set, run the following command: ulimit -u If the current value is not 13312 or greater, then contact your system administrator to set it to at least 13312. • Ensure that you set the soft limit of file descriptor to a minimum of 4096 and hard limit less then or equal to 16384. To verify the current value set, run the following commands: For Soft Limit: /bin/sh -c 'ulimit -n' For Hard Limit: /bin/sh -c 'ulimit -Hn' If the current value is not 4096 or greater, then as a root user, update the /etc/security/limits.conf file with the following entries: soft nofile 4096 hard nofile 16384 Package Requirements Ensure that you install all the operating system-specific packages as described in. User and Operating System Group Requirement Ensure that you create the required operating system groups and users as described in. Note: If your enterprise has a policy against installing Management Agents using the OMS install operating system user account, you can use a different operating system user account to install Management Agents. However, ensure that the user account you use and the OMS install user account belong to the same primary group.

Privilege Requirements Ensure that the Enterprise Manager user has the CREATE_TARGET privilege. If the Enterprise Manager user does not have this privilege, ensure that this privilege is granted to the user. Super administrators, such as the sysman user, have the CREATE_TARGET privilege by default. Destination Host Requirements Ensure that the destination hosts are accessible from the host where the OMS is running. If the destination host and the host on which OMS is running belong to different network domains, then ensure that you update the /etc/hosts file on the destination host to add a line with the IP address of that host, the fully qualified name of that host, and the short name of the host. For example, if the fully-qualified host name is example.com and the short name is mypc, then add the following line in the /etc/hosts file: 172.16.0.0 example.com mypc Destination Host Credential Requirements If all the destination hosts are of the same platform, then they must have the same set of credentials. For example, all the destination hosts running on Linux operating system must have the same set of credentials.

The wizard installs the Management Agent using the same user account. If you have hosts running on the same operating system but with different credentials, then have two different deployment sessions. Permission Requirements • Ensure that the agent base directory you specify is empty and has the write permission for the install user. • Ensure that the instance directory is empty and has the write permission for the install user. Destination Host Time Zone Requirements Ensure that the time zones of the destination hosts have been set correctly. 7.3.2.1 Acquiring the Management Agent Software in Online Mode If Enterprise Manager has access to My Oracle Support via the Internet, it is said to run in Online Mode.

To verify that Enterprise Manager is running in Online Mode, access the Offline Patching page. To access this page, from the Setup menu, select Provisioning and Patching, then select Offline Patching. To download and apply the Management Agent software using Self Update when Enterprise Manager is running in Online Mode, follow these steps: • Ensure that you have set up Self Update.

For information on setting up Self Update, see • From the Setup menu, select Extensibility, then select Self Update. • For Type, select Agent Software, then select Open from the Actions menu. The Agent Software Updates page appears to show the Management Agent software available for different platforms. • Select an update from the list of available updates. All entries other than the one that matches the platform of the OMS host should show their status as Available. • Click Download.

The Schedule Download dialog opens. Note: The Download button is enabled only in the following cases: • You must have the privilege to download and apply in Self Update Console. • You must have selected at least one Management Agent software row in the table, and the Management Agent software must be in Available or Download Failed status. • You must have configured the Software Library. • You must have configured the Self Update staging area. • You must have enabled the online mode for Self Update and set the My Oracle Support credentials. • Select when to download the update.

The following options are available: • Immediately • Later (specified time) • Whether or not to send a notification when the download is complete • Click Select. An Enterprise Manager job is created to download the Management Agent software to Software Library. Enterprise Manager starts downloading the archive from the Oracle Enterprise Manager store. Wait for the download to complete (when in offline mode, the system starts reading from the specified location). When the download is complete, Enterprise Manager displays the Confirmation page. • Once the download is complete, select the Management Agent, then click Apply. This step will stage the Management Agent software in Software Library and make it available to the Add Host Targets wizard, which you will use to install Management Agents on hosts.

7. Free No Limits Coaster Download. 3.2.2 Acquiring the Management Agent Software in Offline Mode If Enterprise Manager is not connected to My Oracle Support via the Internet, it is said to run in Offline Mode. To verify that Enterprise Manager is running in Offline Mode, access the Offline Patching page.

To access this page, from the Setup menu, select Provisioning and Patching, then select Offline Patching. To download and apply the Management Agent software using Self Update when Enterprise Manager is running in Offline Mode, follow these steps: • Ensure that you have set up Self Update.

For information on setting up Self Update, see • From the Setup menu, select Extensibility, then select Self Update. • On the Self Update home page, click Check Updates. A message is displayed that contains the URL to be accessed to download a catalog of all updates. • From an Internet-enabled computer, download the catalog file using the aforementioned URL.

Note: Do not unzip the file. • Copy the downloaded file to either of the following: • To any host that has a Management Agent and EM CLI installed • To the Oracle Management Service (OMS) host (EM CLI is configured out of box on the OMS host machine, so no setup is required) • Navigate to and log in to EM CLI, running the command as the install user, for example:./emcli login -username=sysman • Synchronize EM CLI:./emcli sync • Run the emcli import_update_catalog command to import the archive into the Oracle Management Service instance or the Management Agent you want to update.

For example:./emcli import_update_catalog -omslocal -file= zip file absolute path Before running this command, ensure that you have set up Software Library in Cloud Control. For information on how to do this, see. Tip: For a multi-OMS setup, run emcli help import_update_catalog for more options. • Return to the Self Update home page and do a refresh to see a count of new updates in the Available Updates column. • For Type, select Agent Software, then select Open from the Actions menu. The Agent Software Updates page appears to show the Management Agent software available for different platforms. • Select an update from the list of available updates.

All entries other than the one that matches the platform of the OMS host should show their status as Available. • Click Download. A message displays with a URL and instructions. • From an Internet-enabled computer, download the file from the URL displayed in Step 12.

Do one of the following: • Copy the file to a Management Agent host and follow the instructions displayed in Step 12. • Copy the file to Oracle Management Service host and follow the instructions displayed in Step 12. At this stage, the update will show up in a downloaded state in the Self Update home page. • Once the download is complete, select the Management Agent, then click Apply. This step will stage the Management Agent software in Software Library and make it available to the Add Host Targets wizard, which you will use to install Management Agents on hosts. 7.4.1 Installing Management Agents Using Add Host Targets Wizard This section describes how to install 12 c Management Agents using the Add Host Targets Wizard. To install fresh Management Agents using the Add Host Targets Wizard, follow these steps: • Ensure that you have downloaded and applied the Management Agent software for the platforms of the hosts on which you want to install Management Agents.

For information on how to download and apply the Management Agent software for a platform, see. Note: If you want to install a Management Agent on a host that is running on the Oracle Enterprise Linux 4.x 64-bit platform, Red Hat Enterprise Linux 4.x 64-bit platform, or the SUSE Linux Enterprise 10 64-bit platform, ensure that the 32-bit version of the Management Agent software for the platform is downloaded and applied using Self Update. • In Cloud Control, do one of the following: • From the Setup menu, select Add Target, then select Auto Discovery Results. On the Auto Discovery Results page, under the Servers, Storage and Network tab, select a host that you want to monitor from the displayed list, then click Promote. • From the Setup menu, select Add Target, then select Add Targets Manually. On the Add Targets Manually page, select Add Host Targets and click Add Host. • On the Host and Platform page, do the following: • Accept the default name assigned for this session or enter a unique name of your choice.

The custom name you enter can be any intuitive name, and need not necessarily be in the same format as the default name. For example, add_host_operation_1. A unique deployment activity name enables you to save the installation details specified in this deployment session and reuse them in the future without having to enter all the details all over again in the new session. • From the Add menu, select Manually to enter the fully qualified name and select the platform of the host on which you want to install the Management Agent. The host names that are retrieved from the system for the installation may include IP addresses and short names.

However, it is recommended that you provide fully qualified host names, such as foo.mydomain.com, which persist over the life of the host targets. This is recommended for ease of maintenance and overall security.

Note: • Oracle recommends you to enter the fully qualified domain name of the host. For monitoring purpose, Enterprise Manager Cloud Control adds that host and the Management Agent with the exact name you enter here. • You must enter only one host name per row. Entering multiple host names separated by a comma is not supported. • You must ensure that the host name does not contain underscores('_').

• If the platform name is appended with Agent Software Unavailable, then it indicates that the software for that platform is not available on the OMS host, and that you must download and apply it using Self Update. To access Self Update, from the Setup menu, select Extensibility, then click Self Update. For more information on using Self Update to download and apply the latest software, see.

Alternatively, from the Add menu, you can select either From File to add the host names stored in a file, or Discovered Hosts to add the host names from a list of hosts discovered by Enterprise Manager. For information on how the host name entries must appear in the host file, see. Note: When you select Discovered Hosts from the Add menu, and add hosts from a list of discovered hosts, the host's platform is automatically detected and displayed. The platform name is detected using a combination of factors, including hints received from automated discovery and the platform of the OMS host.

This default platform name is a suggestion, so Oracle strongly recommends you to verify the platform details before proceeding to the next step. If you are correcting the platform names, and if all the hosts run on the same platform, then set the platform for the first host in the table and from the Platform list, select Same for All Hosts. This will ensure that the platform name you selected for the first host is also set for the rest of the hosts in the table. If you are correcting the platform names, and all the hosts run on different platforms, from the Platform list, select Different for Each Host.

Select the correct platform for each host. Note: • If you reach this page (Host and Platform page) from the Auto Discovery Results page, then the hosts you selected on that page automatically appear in the table. In this case, you need to only validate the host names and their platforms. • If you are installing a Management Agent on a platform that is different from the platform on which the OMS is running, then ensure that you have the software for that platform.

If you do not have that software, then go to the Self Update console within Enterprise Manager Cloud Control, download the software, then apply it. For more information, see.

• Click Next. • On the Installation Details page, do the following: • In the Deployment Type section, select Fresh Agent Install. Note: If you have multiple hosts sharing a common mounted drive, then install the Management Agents in two different phases: • In the Add Host Targets Wizard, select the deployment type Fresh Agent Install, and install a Management Agent on the host where the drive is shared. • In the Add Host Targets Wizard, select the deployment type Add Host to Shared Agent, and install a Management Agent on all other hosts that access the shared, mounted drive. (Here, you will select the Management Agent you installed in the previous step as the master agent or shared agent.) • From the table, select the first row that indicates the hosts grouped by their common platform name.

• In the Installation Details section, provide the installation details common to the hosts selected in Step 3 (b). For Installation Base Directory, enter the absolute path to the agent base directory where you want the software binaries, security files, and inventory files of the Management Agent to be copied. For example, /u01/app/Oracle/ If the path you enter does not exist, the application creates a directory at the specified path, and copies the Management Agent software binaries, security files, and inventory files there. Note: The Installation Base Directory is essentially the agent base directory. Ensure that the directory you provide is empty.

If a previously run deployment session had failed for some reason, then you might see an ADATMP_ subdirectory in the agent base directory. In this case, either delete the subdirectory and start a new deployment session, or retry the failed session from the Add Host Status page. • For Instance Directory, accept the default instance directory location or enter the absolute path to a directory of your choice where all Management Agent-related configuration files can be stored. For example, /u01/app/Oracle/agent_inst If you are entering a custom location, then ensure that the directory has write permission. Oracle recommends you to maintain the instance directory inside the agent base directory.

If the path you enter does not exist, the application creates a directory at the specified path, and stores all the Management Agent-related configuration files there. • From Named Credential list, select an appropriate profile whose credentials can be used for setting up the SSH connectivity between the OMS and the remote hosts, and for installing a Management Agent on each of the remote hosts. Note: • If you do not have a credential profile, or if you have one but do not see it in the Named Credential list, then click the plus icon against this list. In the Create New Named Credential window, enter the credentials and store them with an appropriate profile name so that it can be selected and used for installing the Management Agents. Also set the run privilege if you want to switch over from the Named Credential you are creating, to another user who has the privileges to perform the installation. • If the plus icon is disabled against this list, then you do not have the privileges to create a profile with credentials.

In this case, contact your administrator and either request him/her to grant you the privileges to create a new profile or request him/her to create a profile and grant you the access to view it in the Named Credential list. • If you have manually set up SSH public key authentication between the OMS and the remote hosts for a named credential, as described in, you can select this credential from the Named Credential list. • For Privileged Delegation Setting, validate the Privilege Delegation setting to be used for running the root scripts. By default, it is set to the Privilege Delegation setting configured in Enterprise Manager Cloud Control. For example, you can specify one of the following for the Privileged Delegation Setting field: /usr/bin/sudo -u%RUNAS%%COMMAND% /usr/bin/sudo -u -S%RUNAS%%COMMAND% (if a pseudo terminal is required for remote command execution via SSH) /usr/bin/sesu -%RUNAS% -c '%COMMAND%' /usr/bin/pbrun%PROFILE% -u%RUNAS%%COMMAND% /usr/bin/su -%RUNAS% -c '%COMMAND%' If you leave the Privileged Delegation Setting field blank, the root scripts will not be run by the wizard; you will have to run them manually after the installation.

For information about running them manually, see. This setting will also be used for performing the installation as the user set in the Run As attribute of the selected Named Credential if you had set the user while creating that Named Credential. Note: In the Privilege Delegation setting, the%RUNAS% is honored as the root user for running the root scripts and as the user set in the Run As attribute of the Named Credential for performing the installation.

• For Port, accept the default port (3872) that is assigned for the Management Agent to communicate, or enter a port of your choice. The custom port you enter must not be busy. If you are not sure, you can leave this field blank. Enterprise Manager Cloud Control automatically assigns the first available free port within the range of 1830 - 1849. • (Optional) In the Optional Details section, enter the absolute path to an accessible location where the preinstallation and postinstallation scripts you want to run are available. Note that only shell scripts are supported, and only one preinstallation or one postinstallation script can be specified.

If you want to run the script as root, then select Run as Root. If the script is on the host where OMS is running and is not on the host where you want to install the Management Agent, then select Script on OMS. In this case, the script will be copied from the OMS host to the destination hosts, and then run on the destination hosts. • (Optional) For Additional Parameters, enter a whitespace-separate list of additional parameters that you want to pass during the installation. For a complete list of supported additional parameters, see. For example, if you want to provide the inventory pointer location file, then enter -invPtrLoc followed by the absolute path to the file location.

However, note that this parameter is supported only on UNIX platforms, and not on Microsoft Windows platforms. • Repeat Step 3 (b) to Step 3 (i) for every other row you have in the table. • Click Next. • If you want to deploy Management Agents on the selected hosts in a rolling manner, such that the deployment proceeds continuously from one deployment phase to another, ignoring the failed hosts in each deployment phase, specify the following in the $OMS_HOME/sysman/prov/agentpush/agentpush.properties file: oracle.sysman.prov.agentpush.continueIgnoringFailedHost=true For more information about this deployment method, see.

• On the Review page, review the details you have provided for the installation and do one of the following: • If you want to modify the details, then click Back repeatedly to reach the page where you want to make the changes. • If you want to cancel the deployment session for some reason, click Cancel. You are automatically taken to the Add Targets Manually page. • If you are satisfied with the details, then click Deploy Agent to install the Management Agent. You are automatically taken to the Add Host Status page that enables you to monitor the progress of the deployment session. If you want to cancel a running deployment session, then on the Add Host Targets page, click Cancel.

Note that once you cancel the session, you cannot track or resume the session in any way. However, the currently launched commands on the remote hosts will continue to run until they are completed. To view the details or track the progress of all the Add Host sessions using the Add Host Targets Wizard, from the Setup menu, select Add Target, then click Add Targets Manually. On the Add Targets Manually page, select Add Host Targets, then click Add Host Results. • If a particular installation phase has failed or has a warning, review the details provided for each phase in the Agent Deployment Details section of the Add Host Status page, and do one of the following.

Note: To find the cause of a failure, review the log files. One log file is generated per host, so if you installed Management Agents on multiple hosts, then review all the log files. For information on how to access the log files, refer to • Fix the problem by reviewing the error description carefully, understanding its cause, and taking action as recommended by Oracle.

• You can retry the deployment of Management Agents with the same installation details. To do so, on the Add Host Status page, click Retry and select Retry Using Same Inputs. • You can retry the deployment of Management Agents with modified installation details. To do so, on the Add Host Status page, click Retry and select Update Inputs and Retry.

• Ignore the warning or failure, and continue with the session if you prefer. • You can choose to proceed with the deployment of Management Agents only on those remote hosts that have successfully cleared the checks, and you can ignore the ones that have Warning or Failed status. To do so, on the Add Host Status page, click Continue and select Continue, Ignoring Failed Hosts. • You can choose to proceed with the deployment of Management Agents on all the hosts, including the ones that have Warning or Failed status.

Note that choosing this option will ignore the prerequisites in order to allow the Management Agent installation to proceed. If you want to proceed with this option, you must ensure that all the prerequisites are met through manual methods.

The practice of ignoring prerequisite checks must be done only with the help of Oracle Support, or with a clear understanding of the impact of bypassing these checks. To do so, on the Add Host Status page, click Continue and select Continue, All Hosts. Note: If the output of the EM CLI verbs mentioned in this section is misaligned or is difficult to read, adjust your screen width by specifying an appropriate value for the oracle.sysman.prov.agentpush.emcliScreenWidth property in the /sysman/prov/agentpush/agentpush.properties file.

To create an Add Host session and install fresh Management Agents using EM CLI, follow these steps: • Log in to EM CLI from the /bin directory present within the OMS home: $/bin/emcli login -username= Once you run this command, EM CLI will prompt you for a password. Enter the password for the user name you specified.

• Synchronize EM CLI: $/bin/emcli sync • Run the get_targets verb to obtain the list of unmanaged hosts: emcli get_targets -unmanaged -targets='%:host' -format=name:script Make a note of the unmanaged hosts on which you want to install a Management Agent. To view more information on the syntax and the usage of the get_targets verb, run the following command: $/bin/emcli help get_targets • Run the list_add_host_platforms verb to obtain a list of the platforms for which the Management Agent software is available in Software Library: $/bin/emcli list_add_host_platforms [-all] [-noheader] [-script -format] Note that the parameters mentioned in [ ] are optional. For example, $/bin/emcli list_add_host_platforms -all displays the output of this command.

Note: If you want to install a Management Agent on a host that is running on the Oracle Enterprise Linux 4.x 64-bit platform, Red Hat Enterprise Linux 4.x 64-bit platform, or the SUSE Linux Enterprise 10 64-bit platform, ensure that the 32-bit version of the Management Agent software for the platform is downloaded and applied using Self Update. To view more information on the syntax and the usage of the list_add_host_platforms verb, run the following command: $/bin/emcli help list_add_host_platforms • If you want to deploy Management Agents on the selected hosts in a rolling manner, such that the deployment proceeds continuously from one deployment phase to another, ignoring the failed hosts in each deployment phase, specify the following in the $OMS_HOME/sysman/prov/agentpush/agentpush.properties file: oracle.sysman.prov.agentpush.continueIgnoringFailedHost=true For more information about this deployment method, see. Important: You can install a Shared Agent and clone a Management Agent by specifying the -deployment_type option with the submit_add_host verb.

To install a Shared Agent, specify -deployment_type=SHARED. To clone a Management Agent, specify -deployment_type=CLONE.

By default, the -deployment_type option is set to FRESH, so if this option is not specified, a fresh Management Agent is installed on the selected host. For example, $/bin/emcli submit_add_host -host_names=example.com -platform=226 -installation_base_directory=/opt/agent -credential_name=oracle -privilege_delegation_setting=sudo This example installs a fresh Management Agent on the host example.com, having the platform ID 226, in the directory /opt/agent, using the named credential oracle. The -platform parameter specifies the platform ID. Every platform has a unique platform ID associated with it. This association for various platforms is displayed in the output of the list_add_host_platforms verb, as shown in. The -credential_name parameter specifies the named credential that must be used to install Management Agents on the specified hosts.

If you have not created a named credential, you can create one using the create_named_credential verb. For information on how to use this verb, refer To view more information on the syntax and the usage of the submit_add_host verb, run the following command: $/bin/emcli help submit_add_host • Run the get_add_host_status verb to view the status of the created Add Host session: $/bin/emcli get_add_host_status -session_name [-details] [-show_only_failed_hosts] [-host_name] [-noheader] [-script -format] Note that the parameters mentioned in [ ] are optional.

For example, $/bin/emcli get_add_host_status -session_name=ADD_HOST_SYSMAN_Dec_27_2012_3:02:28_AM_PST This example displays the status of the ADD_HOST_SYSMAN_Dec_17_2012_2:02:28_AM_PST Add Host session. To view the detailed Management Agent deployment status of a particular host, run the get_add_host_status verb with the -host_name parameter. For example: $/bin/emcli get_add_host_status -session_name=ADD_HOST_SYSMAN_Dec_27_2012_3:02:28_AM_PST -host_name=example.com This command also displays the location of the log file for the deployment of a Management Agent on the specified host. If the deployment failed, you can investigate the failure by reviewing the log files. One log file is generated per host. Displays a sample output of the command.

Figure 7-4 Output of emcli get_add_host_status Alternatively, to know where the Management Agent log files are located, see Run the list_add_host_sessions verb to view the details or track the progress of all the Add Host sessions: $/bin/emcli list_add_host_sessions [-host_name] [-session_name] [-match_all] [-noheader] [-script -format] For example, $/bin/emcli list_add_host_sessions -host_name=example.com This example displays all the Add Host sessions that the host example.com was a part of. To view more information on the syntax and the usage of the get_add_host_status and the list_add_host_sessions verb, run the following commands: $/bin/emcli help get_add_host_status $/bin/emcli help list_add_host_sessions • If the output of the get_add_host_status EM CLI verb mentions that a particular installation phase has failed or has a warning, do one of the following: • Fix the problem by reviewing the error description carefully, understanding its cause, and taking action as recommended by Oracle.

• You can retry the deployment of Management Agents with the same installation details. To do so using EM CLI, use the retry_add_host verb, with the -retry_using_same_inputs option: $/bin/emcli retry_add_host -session_name -retry_using_same_inputs [-wait_for_completion] Note that the parameters mentioned in [ ] are optional.

For example, $/bin/emcli retry_add_host -session_name='ADD_HOST_SYSMAN_Apr_21_2013_8:02:28_AM_PST' -retry_using_same_inputs • You can retry the deployment of Management Agents with modified installation details. Table 7-2 Supported Additional Parameters Parameter Description INVENTORY_LOCATION Enter the absolute path to the Central Inventory (oraInventory). For example, INVENTORY_LOCATION=$HOME/oraInventory Important: • This parameter is supported only on Unix platforms, and not on Microsoft Windows platforms. • Ensure that you use this parameter only when no other Oracle product is installed on the remote host, and the Central Inventory pointer /var/opt/oracle/oraInst.loc (for Solaris and HP-UX platforms) or /etc/oraInst.loc (for other Unix platforms) does not exist.

• If you use this parameter, ensure that you do not use the -invPtrLoc parameter. -invPtrLoc Enter the absolute path to the inventory file that has the location of the Central Inventory (oraInventory).

For example, -invPtrLoc /tmp/oraInst.loc Important: • This parameter is supported only on Unix platforms, and not on Microsoft Windows platforms. • You can use this parameter even when another Oracle product is already installed on the remote host, and the Central Inventory pointer /var/opt/oracle/oraInst.loc (for Solaris and HP-UX platforms) or /etc/oraInst.loc (for other Unix platforms) exists. • If you use this parameter, ensure that you do not use the INVENTORY_LOCATION parameter. -enablePty Specify this parameter if the privilege delegation tool you are using requires a pseudo terminal for remote command execution via SSH. Most privilege delegation tools such as pbrun, sesu, and su require a pseudo terminal for remote command execution, by default.

You do not need to specify this parameter if you have set the oracle.sysman.prov.agentpush.enablePty property to true in the $/sysman/prov/agentpush/agentpush.properties file. Ensure that you do not pass this parameter if the Central Inventory exists. START_PRIORITY_LEVEL (For Unix based hosts only) Use this parameter to specify the priority level of the Management Agent service when the host is started. This parameter accepts values between 0 and 99.

However, Oracle recommends that you provide a value between 91 and 99 for this parameter. For example, START_PRIORITY_LEVEL=95 If you do not include this parameter, it defaults to 98. SHUT_PRIORITY_LEVEL (For Unix based hosts only) Use this parameter to specify the priority level of the Management Agent service when the host is shut down. This parameter accepts values between 0 and 99.

For example, SHUT_PRIORITY_LEVEL=25 If you do not include this parameter, it defaults to 19. S_agentSrvcName (Only for Microsoft Windows) Enter a custom name for the Management Agent service. Every Management Agent appears as a service in Microsoft Windows, and every Management Agent has a default service name. If you want to assign a custom name to identify it, then use this parameter.

For example, s_agentSrvcName=agentsrvc1 Note: (For Microsoft Windows hosts) If you upgrade a 12.1.0.x Management Agent and you want to install another Management Agent on the same host, which points to a different OMS, ensure that you specify the s_agentSrvcName parameter while installing the Management Agent, as described in the b_startAgent=false Specify this parameter if you do not want the Management Agent to start automatically once it is installed and configured. If you do not specify this parameter, the Management Agent starts automatically once it is installed and configured. B_secureAgent=false Specify this parameter if you do not want the Management Agent to be secured after the install. If you do not specify this parameter, the Management Agent is secured automatically after the install. To secure the Management Agent manually after the install, run the following command: /agent_inst/bin/emctl/ secure agent If you specify this parameter, ensure that you also specify the OMS HTTP port, using the EM_UPLOAD_PORT parameter. For example, b_secureAgent=false EM_UPLOAD_PORT=4899. 7.5 Installing Hybrid Cloud Gateway Agents and Hybrid Cloud Agents With the introduction of Hybrid Cloud Management available with Enterprise Manager Cloud Control 12 c Release 5 (12.1.0.5), Enterprise Manager Cloud Control now provides you with a single pane of glass for monitoring and managing both your on-premise and Oracle Cloud deployments, all from the same management console.

By deploying Hybrid Cloud Gateway Agents onto your on-premise Enterprise Manager system, and by deploying Hybrid Cloud Agents onto the Oracle Cloud virtual hosts serving your Oracle Cloud services, you will now be able to manage the Oracle Cloud targets just as you would any other. For more information on Hybrid Cloud Gateway Agents and Hybrid Cloud Agents, and for instructions to deploy them, see. 7.6 After Installing Management Agents Using Add Host Targets Wizard or EM CLI After you install a Management Agent using the Add Host Targets Wizard or EM CLI, follow these steps: • Verify the installation on the Add Host Status page, or using the get_add_host_status EM CLI verb. Review the progress made on each of the phases of the deployment operation — Initialization, Remote Prerequisite Check, and Agent Deployment.

In the Add Host Targets Wizard, after you click Deploy Agent to install one or more Management Agents, you are automatically taken to the Add Host Status page. For information on using the get_add_host_status EM CLI verb, see. • If required, manually verify the installation: • Navigate to the Management Agent home and run the following command to see a message that confirms that the Management Agent is up and running: $/bin/emctl status agent • Navigate to the Management Agent home and run the following command to see a message that confirms that EMD upload completed successfully: $/bin/emctl upload agent • From the Setup menu, select Manage Cloud Control, then select Agents. Verify that the Management Agent you installed is up and running.

• Verify whether all the plug-ins listed in $/plugins.txt were installed successfully. To do so, run the following command: $/bin/emctl listplugins agent -type all • If you have restrictive Privilege Delegation Provider (PDP) configuration settings, enter the location of nmosudo in your PDP configuration file. Enterprise Manager supports PDPs such as SUDO and PowerBroker that enable administrators to restrict certain users from running certain commands. In Enterprise Manager Cloud Control 12 c Release 2 (12.1.0.2), Release 3 (12.1.0.3), Release 4 (12.1.0.4), and Release 5 (12.1.0.5), nmosudo is located in the sbin directory, which is in the agent base directory.

For example, /sbin/nmosudo. In Enterprise Manager Cloud Control 12 c Release 1 (12.1.0.1) [with or without Bundle Patch 1], nmosudo is located in the agent instance directory.

For example, /bin/nmosudo. Therefore, when you install a 12.1.0.5 Management Agent, you must modify your PDP configuration file to update the new location of nmosudo. For example, if you use SUDO as your PDP, the configuration file for SUDO is typically /etc/sudoers.

In this file, update the following entry with the new location to nmosudo. Sudouser ALL: oracle /eminstall/basedir/sbin/nmosudo * • (Only for UNIX Operating Systems) If you had ignored the prerequisite check warning about not having root privileges, SUDO/PBRUN binaries, or SUDO/PBRUN privileges, then manually run the following scripts as a root user from each of the hosts where the installation was done. If you do not have SUDO/PBRUN privileges, then request your Administrator who has the privileges to run these scripts. • If this is the first Oracle product you just installed on the host, then run the orainstRoot.sh script from the inventory location specified in the oraInst.loc file that is available in the Management Agent home.

For example, if the inventory location specified in the oraInst.loc file is $HOME/oraInventory, then run the following command: $HOME/oraInventory/orainstRoot.sh • Run the root.sh script from the Management Agent home: $/root.sh • If you had ignored a prerequisite check warning about wrong time zone settings, run the following command and follow the steps it displays: $/bin/emctl resetTZ agent • By default, the host and the Management Agent get automatically added to the Enterprise Manager Cloud Control console for monitoring. None of the targets running on that host get automatically discovered and monitored. To monitor the other targets, you need to add them to Enterprise Manager Cloud Control either using the Auto Discovery Results page, the Add Targets Manually page, or the discovery wizards offered for the targets you want to monitor.

For information about discovering targets in Enterprise Manager Cloud Control, refer to. • If you installed a Management Agent on a host that has Oracle Fusion Applications deployed on it, the Management Agent must have access to a set of configuration files for the business metrics feature to function properly. If the Management Agent user is in the same group as the Oracle Fusion Applications install user, ensure that the following files have 640 access: /config/fmwconfig/jps-config-jse.xml /config/fmwconfig/policy-accessor-config.xml /config/fmwconfig/bootstrap/cwallet.sso.

Note: • If Oracle Management Agents 12c (12.1.0.x) hang frequently or do not respond on Solaris 9ux and 10ux operating systems, then refer to document ID 1427773.1 on My Oracle Support. • To know the location where a Management Agent is deployed on a Microsoft Windows host, that is, the Management Agent Oracle home, access inventory.xml, then search for HOME NAME='agent12c2'. The value of the LOC parameter denotes the Management Agent Oracle home. For example, in the following line of C: Program Files Oracle inventory.xml, D: agent12cr4 core 12.1.0.5.0 denotes the Management Agent Oracle home: • You can repoint your existing Management Agents to a new Oracle Management Service (OMS).

For information on how to do this, see the Redirecting Oracle Management Agent to Another Oracle Management Service Appendix present in When you repoint your existing Management Agents to a new OMS, you cannot move the targets monitored by the Management Agents, the target history, and the Management Agent history. The monitored targets and the history data is lost.

Scripting on this page enhances content navigation, but does not change the content in any way.

DOWNLAOD LINK ===>From Almyta Systems: Absolutely free inventory software for small and mid-sized businesses. There is no limit on number of records in the database. There is no limit on a number of workstations that it can be installed on. You will receive full support thru Almyta website, Forum. This free promotional license will not allow you to link your workstations together to make them read and modify the same data. ABC Inventory Software is a Windows-based application. The standard package includes the following modules: inventory control, purchasing, warehouse appointments, asset maintenance work orders, assembly orders, bill of materials, assets, shipping, inventory sales.

ABC Inventory Software is a barcode capable application: it reads scanned barcodes, it prints bar-coded labels and forms. ABC Inventory Software supports: multiple companies, multiple warehouses, multiple inventory locations, kitting, production/expiration dates, unit of measure conversions, serial numbers, multi-level pricing, and inventory cycle counts.

What's new in this version: Now comes in five different languages: English, Spanish, French, German, and Italian. DOWNLAOD LINK ===>Manufacturing Inventory Software: Compare leading manufacturing inventory control software to find the right solution for your manufacturing business.